The new K 2000 series represents continued development of the well-proven Kranzle shuttle series. These machines are industry leaders because of their robustness, modern looking design and top quality engineering.
Single part roto-mold-chassis and therefore extremely stable and robust
Integrated trolley takes steps and rough ground in its stride
5m power lead with cable reel
Storage for trigger gun with safety catch and lances

• Operating pressure bar (MPa): 30-140 (3-14)
• Max admissible overpressure bar (MPa): 160 (16)
• Water output l/min (l/h): 11 (660)
• Inlet water temperature max °C: 60
• Suction height (m): 2.5
• Nozzle size: 042
• Motor speed (rpm): 1400
• Connected load, V / A / Hz: 230 / 14 / 50
• Power intake (kW): 3.2
• Power output (kW): 2.4
• Weight (kg): 37
• Dimensions (L x W x H) in mm: 375 x 360 x 900

• Rota-Mold chassis
• Total-Stop system
• Low Pressure detergent
• 10m Steel braided hose
• M2000 Trigger gun with safety catch
• Stainless steel lance with flat jet nozzle

A Superbly Designed High Quality Machine With A Brass Pump Head, Ceramic Coated Pistons And Stainless Steel Valves. Suitable For Home Use And Medium Commercial / Industrial Usage - About 4 To 5 Hours Use A Day.

• Integrated Roto-Mold trolley, manufactured out of one piece and therefore extremely stable and sturdy takes steps and rough ground in its stride.
• 5m power lead with cable reel
• Dirtkiller lance with stainless steel pipe, Vario-Jet spray lance with fully adjustable spray angle from pencil to wide fan as well as high and low pressure.
• Receptacle for trigger gun with safety catch, Dirtkiller lance and Vario-Jet lance.

• Operating pressure : 30 - 180 bar
• Water Output : 8 L/min
• Admissible overpressure : 195 bar
• Inlet water temperature : max. 60 degree Celsius
• Suction height : 2.5m
• Connected load : 230V, 14 A, 50Hz
• Power Intake : 3.2kW
• Power Output : 2.4kW
• Weight : 37kg
• Dimensions : 375 x 360 x 900

The new K 2000 series represents continued development of the well-proven Kranzle shuttle series. These machines are industry leaders because of their robustness, modern looking design and top quality engineering.
Single part roto-mold-chassis and therefore extremely stable and robust
Integrated trolley takes steps and rough ground in its stride
Integrated hose drum with foldable crank
5m power lead with cable reel
Storage for trigger gun with safety catch and lances

• Operating pressure bar (MPa): 30-160 (3-16)
• Max admissible overpressure bar (MPa): 175 (17.5)
• Water output l/min (l/h): 12 (720
• Inlet water temperature max °C: 60
• Suction height (m): 2.5
• Nozzle size: 042
• Motor speed (rpm): 1400
• Connected load, V / A / Hz: 400 / 6.7 / 50
• Power intake (kW): 3.3
• Power output (kW): 2.6
• Weight (kg): 39.5
• Dimensions (L x W x H) in mm: 375 x 360 x 900

• Total-Stop system
• Low Pressure detergent
• Hose drum
• 15m Steel braided hose
• M2000 Trigger gun with safety catch
• Dirtkiller lance with stainless steel pipe
• Stainless steel lance with flat jet nozzle

The K1132 is mid-range machine, excellent design with plenty of power suitable for all manner of cleaning tasks, at home, for tool hire and for industrial and commercial use.
Integrated trolley takes steps and rough ground in its stride
5m power lead with cable reel
Storage for trigger gun with safety catch and lances

• Operating pressure bar (MPa): 30-130 (3-13)
• Max admissible overpressure bar (MPa): 150 (15)
• Water output l/min (l/h): 10 (600)
• Inlet water temperature max °C: 60
• Nozzle size: 042
• Motor speed (rpm): 2800
• Connected load, V / A / Hz: 230 / 12 / 50
• Power intake (kW): 2.8
• Power output (kW): 2.0
• Weight (kg): 27
• Dimensions (L x W x H) in mm: 300 x 330 x 800

• Easy-Start
• Low Pressure
• 10m Steel braided hose
• M2000 Trigger gun with safety catch
• Stainless steel lance with flat jet nozzle

KRANZLE K 1151 TS Pressure Cleaner With Dirtkiller Lance.
The K1151 is mid-range machine, excellent design with plenty of power suitable for all manner of cleaning tasks, at home, for tool hire and for industrial and commercial use.

• Power supply: 240v
• Operating Pressure: 10-130 bar
• Water flow rate: 10 l/m (2,800 r.p.m)
• Connected load Kw: 2.8 kW (12.0 A)

• 10m steel braided hose
• Trigger gun midi with safety catch
• Flat jet lance
• Dirtkiller lance

The K 1152 TST the latest addition. The launch of the Power Pack series takes this compact and affordable design up to a more robust and incredibly powerful pressure washer by comparison to anything of its class. Incredibly durable design with our heavy duty rotationally - molded casing this model is brilliant for semi-industrial and commercial use.
Single part roto-mold-chassis and therefore extremely stable and robust
Integrated trolley takes steps and rough ground in its stride
Integrated hose drum with foldable crank
5m power lead with cable reel
Storage for trigger gun with safety catch and lances

• Operating pressure bar (MPa): 30-130 (3-13)
• Max admissible overpressure bar (MPa): 150 (15)
• Water output l/min (l/h): 10 (600)
• Inlet water temperature max °C: 60
• Nozzle size: 042
• Motor speed (rpm): 2800
• Connected load, V / A / Hz: 230 / 12 / 50
• Power intake (kW): 2.8
• Power output (kW): 2.0
• Weight (kg): 31.5
• Dimensions (L x W x H) in mm: 360 x 365 x 870

• Rota-Mold chassis
• Easy-Start
• Total-Stop system
• Low Pressure detergent
• Hose drum
• 15m Steel braided hose
• M2000 Trigger gun with safety catch
• Dirtkiller lance with stainless steel pipe
• Stainless steel lance with flat jet nozzle

The Quadro 11/140 is an excellent design, and the most powerful pressure washer running on an ordinary UK 3-pin plug (240 volt), just like the Profi 160 TST, only designed with a larger water break tank and more stability.
Integrated trolley takes steps and rough ground in its stride
Integrated hose drum with foldable crank
5m power lead with cable reel
Storage for trigger gun with safety catch and lances
Shock absorbing buffers, front and rear

• Operating pressure bar (MPa): 30-140 (3-14)
• Max admissible overpressure bar (MPa): 155 (15.5)
• Water output l/min (l/h): 11 (660)
• Inlet water temperature max °C: 60
• Volume water tank (l): 7
• Suction height (m): 2.5
• Nozzle size: 045
• Motor speed (rpm): 1400
• Connected load, V / A / Hz: 230 / 14 / 50
• Power intake (kW): 3.3
• Power output (kW): 2.4
• Weight (kg): 46
• Dimensions (L x W x H) in mm: 590 x 360 x 850

• Total-Stop system
• Water tank
• High Pressure detergent
• Hose drum
• 15m Steel braided hose
• M2000 Trigger gun with safety catch
• Dirtkiller lance with stainless steel pipe
• Stainless steel lance with flat jet nozzle
• Parking brake

The fixed hose drum puts order into the system. Never again entangled or carelessly layed down high-pressure hoses, that have to be detected or disentangled before starting work.
And moreover - the durability of the hoses is substantially extended!

Frequent switching on and off of the motor on medium sized and big Quadros can overload the power circuit and wear out the internal electrical components. For this reason the pump continues to work for 30 seconds in pressure less by-pass operation after having closed the gun. After that period the motor of the new Kränzle cleaners switches off. The motor is restarted when the gun is opened again.

The big water tank on all Quadro models is used as a water resevoir and buffer between water supply and pump.

Detergent injectors at the pressure side, as used for standard machines, consume approx. 30 % of the energy, no matter if they are in operation or not. Due to the water tank it is now possible to suck detergents directly into the pump, preventing a decrease in the output and thus leading to an increase of the efficiency. The detergents can be sprayed without reducing the operating pressure.

• Integrated trolley
• 5 m power lead (799 TS T: 7.5 m)
• Cable reel
• 20 m steel-weave high-pressure hose (899 TS T: 15m)
• Hose drum
• Spray gun with safety cut-out
• Total-Stop facility with delayed motor cut-out
• Safety cut-out
• Dirtkiller lance
• Spray lance with stainless steel pipe
• Continuously adjustable pressure control
• Brass pump head
• Dry-run safety
• Ceramic-coated pump plungers
• Receptacle for spray gun, lance and Dirtkiller
• Detergent injector with filter

• Operating pressure : 30 - 180 bar
• Water Output :13 L/min
• Admissible overpressure : 200 bar
• Inlet water temperature : max. 60 degree Celsius
• Suction height : 2.5m
• Content Water Tank : 10 L
• Steel-braised high pressure hose : 20m NW 6
• Dirtkiller : YES
• Connected load : 4000V, 8.5 A, 50Hz
• Power Intake : 5.5kW
• Power Output : 4.0kW
• Weight : 62kg
• Dimensions : 780 x 395 x 870

By Kränzle Quadro series combines all the benefits of professional advice a one stabilny provides extra safety wheel chassis for excellent stability of a simple Transport for frequent changes of opinion . As well as the class of Professor Class QUADRO has oversized gear with an increased volume of oil Wing greatly extend equipment life in demanding continuous operation. The integrated hose reel with folding handle and up to 20 m high pressure hose per Standard as well as robust protection against impact , the integrated water tank holds 16 liters einem eccentric brake reservoir .
Quadro series - technological Suveren on four wheels.

Product parameters Kranzle QUADRO 800 TST 250 Bar , 13.5 lit / min

1. Professional pump 1400 r / min
2. 20 mm stainless steel pistons with ceramic coating
3. high pressure forged brass head
4. Integrated ballasts water tank with a capacity of 16 liters
5. Suction cleaner suction side
6. Easy Start
7. Pump Protection Pressure switch to by -pass
8. Total Stop
9. Water inlet connection indirectly through the tank
10. Connecting cable 7.5 m
11. integrated the anti- collision
12. Eccentric parking brake

Following the conclusion of the shutter goes into the machine by-pass. When in this mode 30s, it is also turned off electrically. If the client starts in 20 minutes. wash again, the device will start automatically. If you do not wash more than 20 min., The device is completely disconnected from the network. To run it is necessary to return switch to "0" and then "1". This security 20 min. Totalstop service intervention can be discarded by disconnecting the resistor on the control board.

Chemical injector is due to the integrated water tank placed in a low pressure pump (suction side). In this way, it is possible to latch extraneous matter in full working pressure. Suction is achieved by turning the control of chemical injector for high pressure head.
Opt for Kränzle products is always to modern sophisticated high-pressure cleaning machine with technical advantages, which are in all respects absolutely convincing. A summary of these technical details is the innovation and know-how, incurred in the development centers of the Kränzle in Illertissen.
In the final users benefit from the highest quality Made in Germany, a sovereign cleaning performance and extremely long life.

The basic technical characteristics of high-pressure cleaning machines Kränzle:
1. All pumps without exception, the pump head forged brass which guarantees a very long life
2. All equipment except models HD 10/122 , 1132 K and 1152 K are equipped with slow running , quiet 4 - pole motor with long life ( 1,400 rev / min) . Lower speeds reduce starting current , noise and wear on the pump.
3. All pumps without exception, the infinitely variable output pressure and the amount of water depending on the specific treatment requirements.
4. All pumps, without exception, are equipped with large, transparent, glycerin -filled stainless steel pressure gauge. Kränzle quality also in the details.
5. All pumps are fitted with stainless steel pistons, which are coated with a ceramic layer. Positive features stainless steel (good thermal conductivity) in conjunction with the ceramic layer (extreme resistance to wear) dramatically improves durability Kränzle.
6. All pumps are equipped with textile cuffs in conjunction with Teflon-graphite inserts. Excellent sliding properties of PTFE graphite reduce frictional resistance and thus the temperature of the device. Therefore, the machine can run KRÄNZLE certain time without water, without this leading to damage. Water "cushion" between the sealing elements of the pistons to avoid that the air taken in order to get to the seals in the pump. This greatly increases the life of the pump and the piston.
7. All high-pressure cleaning machines from KRÄNZLE switch after the conclusion of guns to bypass mode with reduced pressure. The water circulates in the pump with a residual pressure of 10 bar. The model marked with TS also takes the engine. This is a lightweight pump and drive, resulting in significantly longer life and to save energy.
8. All components of the pump, and safety features, in contact with water are made of stainless steel or special brass. To ensure long and trouble-free life without the presence of corrosion.
9. K 1152 model series TST, K2000, profile, and Quadro are chassis design ROTO -mold . The extremely strong frame resistant to deformation, made from one piece of material to maximize the stability of the high-pressure cleaner. Motor and pump are in the frame perfectly protected and are safe from external influences. This chassis from the company Kränzle is virtually indestructible.
10. PROFI model series Quadra and have built- THERM prefixed water tank, which maximally prevents damage to the pump due to lack of supply water . This makes it possible to almost completely eliminate air bubble implosions inside the pump caused by lack of water. After bridging the water tank can be direct intake of non-pressure water (eg. From Sudan, tanks, etc.).